Ducati Diavel Workshop Manual page 402

Hide thumbs Also See for Diavel:

Table of Contents

Reconnect the hose (7), locating the sealing washers (23) on both sides of the hose end fitting, and secure it with the

special screw (22).

Tighten the special screw (22) to a torque of 23 Nm ± 10% (Sect. 3 - 3,

Frame torque

Pay special attention to the pipes (7) and (21) orientation on the rear brake master cylinder (16).

Insert the rod (18) inside the pump (16), after applying the recommended grease.

Chapters

Table of Contents

Diavel carbon