Ducati Diavel Workshop Manual page 735

Hide thumbs Also See for Diavel:

Table of Contents

Clutch assembly: clutch

Fit the flat ring (11) and the Belleville washer (10) on the clutch center (12), so that the convex side faces the clutch

Locate the Belleville washer (8).

Apply the prescribed grease to the thread of the gearbox primary shaft and the mating surface of nut (7), and fit it over

Belleville washer (8).

Lock the clutch center (12) by means of tool number 88713.3408 and tighten the retaining nut (7) to a torque of 190

Nm (Min. 180 Nm - Max. 200 Nm) (Sect. 3 - 3,

Engine torque

Chapters

Table of Contents

Diavel carbon