Removal Of The Lubrication System - Ducati Diavel Workshop Manual

Hide thumbs Also See for Diavel:

Table of Contents

Lubrication system: oil cooler

Removal of the lubrication system

Remove the oil cooler covers

Drain the oil from the lubrication

Disconnect the sensor (12) of the main wiring.

Open the pipe grommet (11).

Undo the screw (8) and slide out the plate (9).

Slide the tubes (7) out of the half-casing having care not to damage the tubes O-rings (A) that guarantee the coupling

Undo and remove the screw (4) with the spacer (3). Remove the radiator by sliding it out of pins (C) and (D).

Section reference

Removal of belly fairing

Changing the engine oil and

filter cartridge

Table of Contents

Diavel carbon