Ducati Diavel Workshop Manual page 728

Cylinder/piston assemblies
Operations
Refit heads on the engine block
Refit the intake manifolds
Refit the timing belt external
covers and the timing belts
Refit the cooling system pipe on
the water pump
Refit the exhaust unit
Refit the water radiators
Tighten the clamps of the hose that
connects the two radiators and the
hose that connects the RH radiator
to the union
Refill the cooling system
Refit the injectors on the intake
manifolds and reassemble the
supply system
Refit the oil breather pipe, the blow
by, the throttle body and the airbox
Connect the throttle cable
Refit air conveyors
Refit the fuel tank
Reassemble the tank half covers
Reassemble air conveyor covers
Refit the saddles
1
Section reference
9 - 4.5, Refitting the cylinder head
assemblies
9 - 4.4, Refitting the intake
manifold and coolant union
9 - 4.2, Refitting the timing covers
9 - 3.1, Refitting the cooling system
hoses and unions
8 - 8, Refitting the exhaust system
9 - 3.2, Refitting the radiator
9 - 3.1, Refitting the cooling system
hoses and unions
4 - 3, Changing the coolant
8- 6, Refitting the injectors
8 - 6, Refitting the airbox and
throttle body
7 - 8.1, Refitting the throttle
twistgrip
8 - 7, Refitting the air filters
8 - 2, Refitting the fuel tank
5 - 2, Refitting the fuel tank fairings
8 - 7, Refitting the air filters
5 - 3, Refitting the seat