Tail light - number plate holder
Refitting the tail light
Fit the spacers with collar (3) into the rear vibration dampers (2) located on the gloves compartment (23).
Note
Two spacers (3) must be inserted inside and outside on the right side and two spacers (3) must be inserted inside and
outside on the left side.
Insert the split vibration damper (H) on the wiring (G) of the left optical unit (13) and the split vibration damper (H) on
the wiring (C) of the right optical unit (1).
Note
The USA version uses red optical units (13) and (1).