Removal Of The Gearbox Assembly - Ducati Monster 796 Workshop Manual

Gearbox assembly: gearbox shafts
29 5 th , 6 th speed selector fork
30 Selector fork shaft
31 Shim, thickness 1
32 Needle roller retaining circlip
Spare parts catalogue
796
GEARCHANGE CONTROL
796
GEARBOX
796 ABS
GEARCHANGE CONTROL
796 ABS
GEARBOX
Important
Bold reference numbers in this section identify parts not shown in the figures alongside the text, but which can be found in
the exploded view diagram.

Removal of the gearbox assembly

Operations
Remove the engine from the frame 9 - 1,
Remove the clutch cover
Remove the complete clutch
assembly
Remove the lubrication system
Remove the generator cover
Remove the engine starting system 6 - 3,
Remove the side timing belt covers 9 - 4.2,
Remove the timing belts
Remove the cylinder heads
Remove the cylinder barrel/piston
assemblies
Remove the gear selector lever
Remove the gear interlock plunger
Separation of the crankcase halves 9 - 9.2,
Withdraw the selector fork shafts (30).
Move the forks (28) and (29) to disengage them from the slots in the selector drum.
Remove the selector drum (13) taking care not to lose shims (31) and (27) mounted on the shaft. Note that the
positions of the shims must not be inverted.
Now you can renew the needle roller retaining ring (32) and the special needle rollers (14).
Remove gear selector forks (29) and (28).
Section reference
Removal of the engine
9 - 6.2, Removal of the clutch cover
9 - 6.1, Removal of the APTC clutch
9 - 2.1, Removal of the oil pump
9 - 8, Removal of the generator
cover
Electric starting system
Removal of the timing belt
covers
9 - 4.2, Removal of the timing
system assembly
9 - 4.4, Removal of the cylinder
head assembly
9 - 5, Removal of the
cylinder/piston assembly
9 - 7.1, Removal of the gear
selector lever
9 - 7.1, Disassembly of gear
interlock plunger and pawl
assembly
Separation of the
crankcase halves