BBS and DB faults
(A) low / high beam and parking light connections
Location of left hand handlebar switchgear set connection.
PIN numbering for wiring harness side dashboard connector.
Note
Check integrity of electric circuit – short-circuit to Vdc = with dashboard on, using a voltmeter, a voltage is measured
between the wire tested and ground.
Check integrity of electric circuit – short-circuit to ground = with the battery cables disconnected, using an ohmmeter,
continuity is detected between the wire tested and ground.
Check integrity of electric circuit – open circuit = with the battery cables disconnected, using an ohmmeter, no continuity
is detected between the two ends of the wire tested.
Low beam lights not working
Location of connections and components