Riding Mode" Customisation; Dtc (Ducati Traction Control) Setting Function - Ducati Diavel Workshop Manual

Instruments
- RIDING MODE
- MENU 2
- BACK LIGHT
- RPM
- PIN CODE
- LAP
- BATTERY
- CLOCK
- SET UNITS
- ABS
- EXIT
To quit the setting menu, use button (1) "s" or button (2) "t" to select the "EXIT" indication and press the reset button
(3).

"Riding Mode" customisation

This function customises each riding style.
To access the function it is necessary to view the ""Setting" menu", using buttons (1) "s" or (2) "t" select the "RIDING
MODE" function and press the reset button (3) to enter the following page.
When accessing the function, the three riding modes appear on the display; to customise the parameters, use buttons (1)
"s" or (2) "t" to select the riding mode to be modified and press reset (3) to confirm.
The parameters that can be "customised" are "DTC" (Ducati Traction Control) and '"ENGINE".
Any parameter change made is saved in the memory also after a Battery-Off.
To modify the DTC parameters see the paragraph "DTC (Ducati Traction Control) setting function".