Flywheel - alternator
Remove the water pump components as described in Sect. 9 - 3.3,
Removal of the water
pump.
Removing the flywheel - generator assembly
Use the tool 88713.3367 fixed to the M10 side stand fixing holes (D).
Secure the tool to the flywheel with the screws (E).
Unscrew the alternator-flywheel retaining nut (15).
Warning
While unscrewing the nut, apply axial pressure to the socket to avoid damage or injury in the event of the wrench
suddenly slipping off the nut.
Remove the nut (15), the washer (16) and the flywheel assembly (V) with the driven gear (21) from the crankshaft.
Remove the inner race (19), the needle roller bearing (20) and the washer (18).