Cylinder head assemblies: camshafts
Removal of the intake manifold and coolant union
Operations
Remove the saddles
Remove air conveyor covers
Remove the tank half covers
Remove the fuel tank
Remove air conveyors
Disconnect the throttle cable
Remove the airbox, the throttle
body, the blow by and the oil
breather tube
Remove the fuel system and the
injectors from the intake manifolds
Empty the coolant out of the
cooling system
Remove the expansion reservoir
tank
Loosen the clips (F) and remove the hoses (T).
Remove the manifolds (25) undoing the screws (21).
Section reference
5 - 3,
Removal of the seat
8 - 7,
Removal of the air filters
5 - 2,
Removal of the fuel tank
fairings
8 - 2,
Removal of the fuel tank
8 - 7,
Removal of the air filters
7 - 8.1,
Removal of the throttle
twistgrip
8 - 6,
Removal the airbox and
throttle body
8 - 6,
Removal of the fuel injectors
4 - 3,
Changing the coolant
9 - 3.1,
Removal of the expansion
tank