Front brake control
Unscrew the two fixing screws (21) of the left front brake calliper (9) to the fork leg.
Repeat the operation for the right brake calliper (18).
Undo the special screws (19) and (25) and collect, from both callipers, the sealing washers (4).
Detach the front brake callipers from the pipe (13) and (20).
Removal of the brake discs
The front brake discs consist of an inner carrier, which is mounted to the wheel, and an outer rotor. Both parts must be
changed together as a pair.
Remove the front wheel (Sect. 7 - 1,
Removal of the front
wheel).
Undo the retaining screws (5) of the disc to the wheel, remove the disc (7) and, on its left side, slide out the phonic wheel
(6).
Overhauling the front brake components