Engine Torque Settings - Ducati Diavel Workshop Manual

Torque settings
Wiring protection on airbox lower half-housing
Oval intake funnel on airbox lower half-housing
retaining screw
Conveyors to airbox retaining screw
Map sensor bracket to airbox upper half housing
retaining screw
Air temperature sensor to LH conveyor retaining screw M4x0.7
Map sensor on bracket retaining screw
Blow-by pipe to airbox retaining clamp
Throttle body on intake funnels retaining screw
Intake ducts throttle body retaining clamp
Injectors to funnels retainer
Canister to fuel tank (USA version) retainer
Plug cover to cover retaining screw
Plug cover and central cover to plug retaining screw
Central cover to tank retaining screw
Side cover to tank rear retaining screw
Central cover to plug cover retaining screw
Central cover to side cover retaining screw
Clip air inlets on tank plug cover retaining screw
LH conveyor / LH conveyor support retaining screw
LH conveyor support to tank side cover retaining screw M5x0.8
LH conveyor cover to LH conveyor support retaining
screw
Central to lateral belly fairings retaining screw
LH belly fairing / radiator closure / central belly fairing
retaining screw
RH belly fairing / radiator closure / central belly fairing
retaining screw
LH belly fairing to electrical components retaining
screw
RH belly fairing to electrical components retaining
screw
LH belly fairing / electrical components cover /
electrical components support retaining screw
RH belly fairing / electrical components cover /
exhaust protection retaining screw
*dynamic safety-critical point; tightening torque must be within Nm ±5%.
Note
For product specifications and symbols, refer to

Engine torque settings

Part
Idler and tensioner pulley bolts
Camshaft pulley retaining nut
Rocker arm shaft covers
Coolant temperature sensor on coolant outlet
union
Cylinder head nut:
Snug torque
Preload torque
Tightening torque
Cam cap screw:
Air intake oil breather
M5x0.8
M5x0.8
M5x0.8
M6x1
M6x1
Fuel system
M5x0.8
M5x0.8
M5x1
Fairings
M5x0.8
M5x0.8
M5x0.8
M5x0.8
M5x0.8
M5x0.8
M5x0.8
M4x0.7
M5x0.8
M5x0.8
M5x0.8
M5x0.8
M5x0.8
M5x0.8
M5x0.8
M5x0.8
"Product specifications" (Sect. 1 - 2).
Thread (mm) Nm
M20x1 50
M17x1 71
M12x1.25 15
M12x1.5 23
M10x1.5
20
40
60
M8x1.25
5
5
3.5
10
2
10
1.5
3.5 solid threadlocker on
screw
2.5
5
4
2 LOCK 1
2 LOCK 1
2 LOCK 1
2 LOCK 1
0.33
0.33
2 solid threadlocker on
screw
1.5
0.33
5
4 solid threadlocker on
screw
4 LOCK 1
4 LOCK 1
4 LOCK 1
4 LOCK 1
4 LOCK 1
4 LOCK 1
Min. Max. Note
45 55 LOCK 2 or TB1324
64 78 GREASE A
14 16 LOCK 2 or TB1324
20 26 LOCK 4 – Restrain the
insert when tightening
Apply GREASE C to the
underside of the nut
38 42 and the thread of the
57 63 stud
Engine oil