Introduction to the electrical system of the Diavel
from BBS
external 12V power source
As soon as you start the engine the low beam turns on automatically. In KEY-ON condition and engine off it is possible to
turn on the high and low beams that will switch off after 60 seconds if the engine is not started: in Key-ON condition the
headlights are off, in Key-ON and engine running the headlights turn on automatically and in Key-ON it is possible to turn
them on with the LH switch.
Location of elements on motorcycle
(A) Injection relay; (B) ETV relay (throttle valve operating engine); (C) Radiator fan relay; (D) Hands free relay.
(E) ECU; (G) BBS (Black Box System or Central electronics); (F) ABS hydraulic unit with integrated control unit.
Fuses located at the rear left of the vehicle.
(1) 10A dashboard; (2) 5A engine control unit; (3) 15A key-sense; (4) 20A injection relay; (5) 15A throttle opening relay
(ETV).