Gearbox assembly: gearbox shafts
Reassembly of the gearbox shafts
Figure 1 shows all the parts to be reassembled on the gearbox primary shaft (2), with the calculated end shims (1) and
(11) (Sec. 9 - 9.2,
Reassembly of the crankcase
halves).
Figure 2 shows all the parts to be installed on the gearbox secondary shaft (25), with calculated end shims (15) and (26)
(Sec. 9 - 9.2,
Reassembly of the crankcase
halves).