Ducati Diavel Workshop Manual page 664

Hide thumbs Also See for Diavel:

Table of Contents

Cylinder head assemblies: checks and adjustments

Remove the installed tools to check timing. Then tension the belts to the value of the prescribed operation, as described at

Sect. 6 - 11,

Measuring the timing belt tension

In case of values different from the described ones (Sect. 3 - 1.1,

the timing pulley and correct the value detected by turning the ring nut of the timing shaft with the supplied wrench with

code 88713.1806.

Lock the three retaining screws (M) of the timing pulley to the specified torque of 10 Nm (Min. 9 Nm - Max. 11 Nm)

(Sect. 3 - 3,

Engine torque

Refit the components removed in the procedure.

Refit the cylinder head cover

Refit the coils

Refit the exhaust unit

settings) and mark the new position of the components.

Section reference

Refitting the camshafts

Ignition coils

Refitting the exhaust system

system/valves), loosen the fixing screws (M) of

Chapters

Table of Contents

Diavel carbon