Adjusting The Throttle Cable; Removal Of The Throttle Twistgrip - Ducati Diavel Workshop Manual

Handlebar unit: Throttle twistgrip
Operations
Refit the front brake lever
Refit the right-hand and left-hand
handlebar switches
Refit the throttle twistgrip
Refit the clutch lever

Adjusting the throttle cable

To operate on the set screws of the throttle grip cables, consult Sect. 4 - 3,

Removal of the throttle twistgrip

Peel back the rubber sleeve (A) protecting the throttle control cables.
Undo the screws (B) of the throttle grip (6) and open the command.
Disconnect the throttle grip cables (10) by unhooking the cable ends (C) from their seats.
Remove the throttle twistgrip (6) from the handlebar.
To replace the throttle grip cables, it is necessary to remove it from the throttle body (Sect. 8 - 6,
and throttle body).
Replacement throttle cables are supplied complete with adjusters.
Section reference
7 - 3, Refitting the front brake
master cylinder
6 - 5, Checking the indicating
devices
7 - 8.1, Refitting the throttle
twistgrip
7 - 8.2, Refitting the clutch master
cylinder assembly
Adjusting the throttle cable.
Removal the airbox