Removing The Electrical Components Support - Ducati Diavel Workshop Manual

Electrical components support
Spare parts catalogue
Diavel ABS
BATTERY SUPPORT
Diavel Carbon
BATTERY SUPPORT
ABS
Important
Bold reference numbers in this section identify parts not shown in the figures alongside the text, but which can be found in
the exploded view diagram.

Removing the electrical components support

Operations
Remove the belly fairing
Remove the following elements located inside the electrical components support:
- the battery fixing bracket (4) and the battery (14) as specified under Section 6 - 2, Battery;
- the voltage regulator (3) as specified under Section 6 - 2,Rectifier-regulator;
- the solenoid starter (18) as specified under Section 6 -
Remove the connector (A) of horn (22) from the main wiring.
Undo the screw (25) and remove the horn (22) from the vehicle.
Loosen screws (11) and (21) and recover the washer (10) and the spacer (20).
Remove the electrical components support (5).
Pay attention to the main wiring branch and to any other wiring inside of it.
Refer to the tables reported in this Section for the components position.
Section reference
5 - 5, Removal of belly fairing
3,Solenoid starter;