Instruments
Total distance covered indicator: "Odometer"
This function shows the total distance covered by the vehicle (in Km or miles depending on the specific application).
At Key-On the system automatically enters this function.
The odometer reading is stored permanently and cannot be reset.
If the distance travelled exceeds 199999 km (or 199999 miles), the value "199999" will be displayed permanently.
"Trip 1" meter
This function shows the distance travelled since the Trip meter was last reset (in Km or miles depending on the specific
application).
Press and hold (1) "s" for 3 seconds while in this function to reset the trip odometer.
When the reading exceeds 9999.9, distance travelled is reset and the meter automatically starts counting from 0 again.
If the system measurement units are changed at any moment through the
"Units of measurement modification
function"
function of the Setting menu, or if there is an interruption in the power supply (Battery Off), the distance travelled is reset
and the count starts from zero (considering the newly set unit of measurement).
When this value is reset, also the "Average fuel consumption", "Average speed" and "Trip time" functions are reset.