Tail light - number plate holder
Reposition the assembly on the swingarm and tighten the screws (11) to a torque of 25 Nm ± 10% (Sect. 3 - 3,
torque
settings).
Removal of the tail light
Operations
Remove the saddles
Remove the cover of the tool tray
Disconnect the connectors (A) and (B) of the tail lights (1) and (13).
Loosen the screws (4) and slide the tail lights (1) and (13) to the rear side; recover the four spacers (3) and the washers
(14).
Section reference
5 - 3,
Removal of the seat
7 - 17,
Removal of the tool tray
Frame