Cooling System; Front Wheel; Front Suspension (Diavel Abs); Front Suspension (Diavel Carbon Abs) - Ducati Diavel Workshop Manual

Technical specifications
Gearbox shafts
Selector drum
Gear selector fork

Cooling system

Type
Coolant capacity
Thermostat

Front wheel

Minimum tread depth
Tyre pressure
Wheel shaft runout
Wheel rim runout

Front suspension (Diavel ABS)

Type

Front suspension (Diavel Carbon ABS)

Type
Fork

Rear wheel

Minimum tread depth
Tyre pressure
Reference
End float
End float
Selector fork end thickness 3.90 to 4.00 mm
Selector fork-to-gear
clearance
Reference
fluid with two radiators with closed circuit, with
double curved radiator with double fan and mixing
thermostat
Opening start
Electric fan insertion
Electric fan deactivation
Reference
In the most worn part
Cold
On 100 mm
Radial
Axial
Reference
Travel along leg axis
Oil charge per fork leg
Reference
Travel along leg axis
Oil level per fork leg
Hydraulic damping standard
setting. Undo adjusters from the
fully closed position (turn counter
clockwise).
Spring preload
Reference
In the most worn part
Cold
Standard value
0.070 to 0.285 mm
Standard value
2.5 bar (rider only)
2.6 bar (with
passenger and/or
bags)
0.8 mm
0.5 mm
Technical specifications
MARZOCCHI:
Upside-down hydraulic fork with adjustable
compression, rebound and spring preload.
Fork leg Ø 50 mm
120 mm
720 cm 2 (per leg)
Technical specifications
MARZOCCHI:
Upside-down fork with DLC coating,
adjustable compression, rebound and spring
preload.
Fork legs Ø 50 mm.
120 mm
720 cm 2
Compression: 1 turn and a half
Rebound: 2 turns
Fully open
Standard value
2.5 bar (rider only)
2.6 bar (with
Service limit
0.05 to 0.20 mm
0.10 to 0.40 mm
0.4 mm
Technical specifications
2.3±0.5 litres
65 °C ±2 °C
103 °C
102 °C
Service limit
2 mm
0.2 mm
2 mm
2 mm
Service limit
2 mm