section
N 7.2
Removal of the gearbox assembly
A
Operation
Separation of the crankcase halves
Withdraw the selector fork shafts (30).
B
Move the forks (28) and (29) to disengage them from the slots in the selector drum (13).
C
D
E
F
G
Withdraw the selector drum (13) taking care not to lose shims (31) and (27) mounted on the shaft. Note that the positions of the
shims must not be inverted.
Now you can renew the needle roller retaining ring (32) and the special needle rollers (14).
H
L
M
N
P
124
Engine
Section reference
N 9.2, Separation of the crankcase halves
28
30
29
13
30
13
29
28
Monster 696/696+ - M.Y. 2009 - edition 00