Ducati Diavel Workshop Manual page 528

Hide thumbs Also See for Diavel:

Table of Contents

Frame inspection

Check for the presence of clips (22) and make sure they are fitted aligned with the holes in the gloves compartment (23)

front side, as shown in the figure.

The threaded holes of the clips (22) must be perfectly aligned with the holes on the gloves compartment.

If removed, insert the rear handgrab (17) fully home through the opening in the gloves compartment (23) as shown.

While inserting the component, make sure to push it past the stop tab (Y) without hitting it.

Chapters

Table of Contents

Diavel carbon