Exhaust system
Removal of the exhaust system
Remove the silencer, as described in the paragraph
"Removing the
silencer" of this section.
Loosen the screws (28) and remove the exhaust by-pass valve cover (27).
Turn the exhaust valve pulley (A) to facilitate the throttle cable (25) output.
Release the end fitting (B) of the cable (25) from the exhaust valve (D) and remove the circlip (39).
Release the control cable (25) from the plate (C).
Remove the two retaining springs (16) and remove the central exhaust pipe (26).
Remove the retaining spring (16) and the upper exhaust pipe (19).