BBS and DB faults
Location of horn with relative connection.
PIN numbering for wiring harness side dashboard connector.
Note
Check integrity of electric circuit – short-circuit to Vdc = with dashboard on, using a voltmeter, a voltage is measured
between the wire tested and ground.
Check integrity of electric circuit – short-circuit to ground = with the battery cables disconnected, using an ohmmeter,
continuity is detected between the wire tested and ground.
Check integrity of electric circuit – open circuit = with the battery cables disconnected, using an ohmmeter, no continuity
is detected between the two ends of the wire tested.
Turn indicators not working
Fault codes
DDS: no fault code displayed.
Dashboard: no fault code displayed.
Wiring diagram
DB Dashboard connection, BBS BBS unit connection, S turn indicator button, F1 front left turn indicator, F2 front right
turn indicator, F3 rear left turn indicator, F4 rear right turn indicator. 2 on grey button – Gr, 1 on red/blue button – R/B, 4
on black button – Bk, DB 26 white/black W/Bk, DB 25 green/black – G/Bk, BBS 16 white/green – W/G, BBS 17