Ducati Diavel Workshop Manual page 73

Hide thumbs Also See for Diavel:
Table of Contents

Advertisement

Maintenance operations
Important
Check the cooling circuit for possible leaks.
Top up the coolant through the expansion reservoir filler to bring the level up to the MAX. mark.
Tighten the cap (1) of the expansion reservoir.
Operations
Reassemble the RH intake duct
Reassemble the RH front half-
fairing
Changing the brake fluid
Warning
Brake fluid is corrosive and will damage paintwork. Avoid contact with eyes and skin. In the case of accidental contact,
wash the affected area thoroughly with plenty of running water.
Changing the fluid in the front brake circuit
Remove the cover (1) with the membrane from the front brake fluid tank (2) by undoing the screws (3).
Siphon off the fluid from the reservoir (2).
Replace the membrane (without the plug) on the tank to avoid brake fluid splashes during the following operations.
Move the brake callipers pistons back: to carry out this operation unscrew the fixing screws (4) of the callipers on the fork
plates and push, by removing them from each other, both pads from every calliper; during this operation be careful with
the fluid level, that must always be aspirated each time that it flows back in the tank.
Section reference
8 - 7,
Refitting the air filters
5 - 2,
Refitting the fuel tank
fairings

Advertisement

Table of Contents
loading

This manual is also suitable for:

Diavel carbon

Table of Contents