Handlebar unit: Throttle twistgrip
Refitting the throttle twistgrip
Lubricate the ends of the throttle grip cables (10) and the twistgrip race with the recommended grease.
The closing cable (10) features a writing on the yellow tube, whereas the opening one (10) features such writing on the
white tube.
To refit the throttle control components, proceed in inverse order to the removal procedure, making sure that the twistgrip
housings locate in the reference hole in the handlebar.
Tighten the screws (B) of throttle twistgrip (6) to a torque of 10 Nm ± 10% (Sect. 3 - 3,
Frame torque
settings).
1