Ducati Diavel Workshop Manual page 60

Maintenance operations
Tighten the exhaust plug (3) to a torque of 20 Nm (Min. 18 Nm - Max. 22 Nm) (Sect. 3 - 3,
Remove the oil sump filter cartridge (4) using service tool 88713.2906.
Important
Dispose of the used cartridge, do not attempt to reutilise it.
Fit a new cartridge (4), using the tool 88713.2906 making sure to lubricate the gasket with engine oil.
Note
As an alternative, it is advisable to refill the filter cartridge with engine oil (4) before fitting it: this enables the
recommended oil level to be maintained without topping up.
Screw the cartridge fully home and tighten it to a torque of 11 Nm (Min. 10 Nm - Max. 12 Nm) (Sect. 3 - 3,
settings).
Every two oil changes, clean the oil pickup gauze filter.
Undo the four screws (5) of the external cap (6) and remove it.
Engine torque settings).
Engine torque