Engine Setting Function (Engine Power Control) - Ducati Diavel Workshop Manual

Instruments
To modify the Engine parameters see the paragraph "ENGINE setting function (Engine Power Control)".
The parameters set by Ducati for each individual riding style can be restored with the "DEFAULT" function.
To reset the "default" parameters see paragraph "DEFAULT function (Resetting Ducati default parameters)".
If the parameters have not been modified (customised) or are reset using the "DEFAULT" function, when you quit the
Setting menu, in the "main" screen, the "background" indicating the riding style (SPORT, TOURING or URBAN) becomes
blue (1).
Changes should only be made to the parameters by people who are experts in motorcycle setup; if the parameters are
changed accidentally, use the "DEFAULT function (Resetting Ducati default parameters)" to reset the parameters.
DTC (Ducati Traction Control) setting function
This function allows you to customise the level of DTC intervention (Ducati Traction Control) or disable it for every riding
mode.
To access the function it is necessary to view the ""Setting" menu", using buttons (1) "s" or (2) "t" select the "RIDING
MODE" function and press the reset button (3) to enter the following page. Use button (1) "s" or (2) "s" to select the
riding style to change and press the reset button (3).
To go to next page use button (1) "s" or (2) "s" to select the "DTC" indication and press the reset button again (3) to
confirm selection.
When accessing the function, the currently set DTC level appears at the left-hand side of the display, inside a rectangle
(ex.: DTC 1). Use button (1) "s" or (2) "s" to select the new intervention level (1 to 8) or OFF to disable the Traction
Control; after selecting the new setting, press the reset button (3) to highlight "MEMORY" indication. At this point, store
the new setting by pressing and holding the reset button (3) for 3 seconds with "MEMORY" displayed. If the setting has
been stored successfully, the display will show "MEMORIZED" in green for 2 seconds and the EXIT option will be
highlighted automatically.