Battery charging system
Important
Never move the container away from the battery. Do not cut or puncture the liquid container.
Make sure that all the electrolyte has flowed out. Carefully extract the container (2) from the battery.
Fit the cap bar (3) -previously removed from the electrolyte container (2)- to the battery, ensure the caps plug off all filler
holes.
3 -12 Ah batteries: leave to stand for at least 30 min.
12 Ah batteries: leave to stand for at least 1 hour.
Rest the cap strip on the filler holes without fixing it. Recharge the battery as described in the paragraph "Recharging the
battery".
Note
When using an automatic reduction battery charger, check that the charger current (ampere) is equal or higher than the
value of standard charging system (STD) indicated on the battery itself.