Removal Of The Front Brake Master Cylinder - Ducati Diavel Workshop Manual

Front brake control
33 Screw
34 Pair of brake pads
Spare parts catalogue
Diavel ABS
FRONT BRAKE
Diavel ABS
FRONT AND REAR WHEELS
Diavel Carbon
FRONT BRAKE
ABS
Diavel Carbon
FRONT AND REAR WHEELS
ABS
Important
Bold reference numbers in this section identify parts not shown in the figures alongside the text, but which can be found in
the exploded view diagram.

Removal of the front brake master cylinder

Warning
The brake master cylinder manufacturer advises against servicing the brake master cylinder due to the safety critical
nature of this component. Incorrect overhaul of these critical safety components can endanger rider and passenger safety.
Maintenance operations on these units are limited to renewal of the following parts: control lever, fluid reservoir assembly
and relative fasteners and master cylinder fasteners.
Operations
Drain the braking system
Remove the rear-view mirrors
Note
For the ABS front braking system, also refer to Sect. 7 - 5,
components, Sect. 7 - 7,
Undo the special screw (3), collect the sealing washers (4), and release the front brake master cylinder assembly (1) from
the pipe.
Loosen the screws securing the terminal (12) and then remove the front brake master cylinder assembly (1) from the
handlebar.
Section reference
4 - 3, Changing the brake fluid
5 - 1, Removal of the rear-view
mirrors
ABS components maintenance.
ABS system operating information, Sect. 7 - 6, System