Removing The Water Radiators - Ducati Diavel Workshop Manual

Cooling system: water radiators
33 Water radiator (left)
34 Washer
35 Screw
Spare parts catalogue
Diavel ABS RADIATOR (RIGHT)
Diavel ABS RADIATOR (LEFT)
Diavel ABS HALF FAIRING
Diavel Carbon RADIATOR (RIGHT)
ABS
Diavel Carbon RADIATOR (LEFT)
ABS
Diavel Carbon HALF FAIRING
ABS
Important
Bold reference numbers in this section identify parts not shown in the figures alongside the text, but which can be found in
the exploded view diagram.
The exploded view shows only the RH water radiator since the left one features the same components except the plug
(22).

Removing the water radiators

Operations
Remove the saddles
Remove air conveyor covers
Remove the tank half covers
Remove the fuel tank
Remove air conveyors
Disconnect the throttle cable
Remove the airbox, the throttle
body, the blow by and the oil
breather tube
Empty the coolant out of the
cooling system
Loosen the clamps of the hose that
connects the two radiators and the
hose that connects the RH radiator
to the union
Loosen the screws (P) that retain the supports (S) of the front splashguard to the air ducts (24) and (26).
Section reference
5 - 3, Removal of the seat
8 - 7, Removal of the air filters
5 - 2, Removal of the fuel tank
fairings
8 - 2, Removal of the fuel tank
8 - 7, Removal of the air filters
7 - 8.1, Removal of the throttle
twistgrip
8 - 6, Removal the airbox and
throttle body
4 - 3, Changing the coolant
9 - 3.1, Removal of the cooling
system hoses and unions