The Hands Free system
This photo shows the active and passive keys. From top to bottom:
1 Active key with mechanical part unfolded;
2 Active key with mechanical part folded;
3 Passive key
How to turn the motorcycle on
In order to switch the dashboard on and start the engine, the active key must be within 1.5 metres from the bike seat
covering the receiver antenna.
How to switch the dashboard on
The dashboard may switched on either from the on/off switch on the handlebar or from the button on the Hands free
system.
With the engine off, the on/off switch is turned to "RUN OFF".
With the motorcycle and dashboard off, the on/off switch is turned to "RUN OFF".
To switch the dashboard on, press the on/off switch on the handlebar downward. When released, the switch automatically
returns to the "RUN OFF" position. If the key is detected, the dashboard switches on and the electric steering lock is
disengaged (if engaged previously).
Press the on/off switch on the handlebar downward. When released, the switch automatically returns to the "RUN OFF"
position. If the key is detected, the dashboard switches on and the steering lock is disengaged (if engaged previously).
The dashboards may also be switched on with the on/off button on the Hands free system. In this case you just have to
press once the button located in the tank front side.
Note
In the USA version the door (1) is not present.