Tester Power Supply - Ducati Diavel Workshop Manual

Diagnostic instruments
The touch-screen display unit (A) serves for both data display and input, using the stylus housed on the side of the unit.
The self-diagnosis module (B) enables communication between the DDS diagnosis instrument (1) and the motorcycle's
on-board electronic control unit (ECU).
The user interface software resides in the display memory card (C) which is housed in the Palmtop display unit (A).
The display unit is equipped with two connection panels: one at the top of the instrument and one at the bottom.
The top connection panel has 6 connection sockets with the following functions:
- one VGA output (E);
- one port for connection of the measurement module (F);
- one RS232 serial port for connection of peripheral devices (COM1) (G);
- a second RS232 serial port for connection of peripheral devices (COM2) (H);
- two generic USB ports (USB1 and USB2) (L).
The bottom connection panel has 3 connection sockets with the following functions:
- one USB port (M);
- one power connection socket (N);
- one diagnostics connection socket (P).
You can connect a printer to the DDS diagnosis instrument (1) to print test reports: connect the printer to the serial port
(COM1) (G) located on the top connection panel of the tester (1).
Technical data
Power supply:
- from the mains - 220 V;
- from the vehicle battery - 12 V.
Components supplied with the DDS diagnosis instrument
The DDS diagnosis instrument (1) is supplied in a kit together with the following items:
- Rechargeable DDS battery
- Battery charger
- Mains power adapter
- USB memory card reader
- Power and diagnostic cable complete with fuse
- CD containing DDS installation software for PC
- USB cable
- Belt tension sensor

Tester power supply

The DDS (1) part number 97900.0215 can be powered from the vehicle as follows: