Setting" Menu - Ducati Diavel Workshop Manual

Instruments
ETV
DEVICE DBS MASTER
PRESSURE SENSOR
ENGINE TEMP.
T-AIR SENSOR
FUEL INJECT.
COIL
INJECTOR
PICK UP
LAMBDA
FAN RELAY
CAN LINE
BATTERY
DEVICE ABS
STOP LIGHT
ECU GENERIC
KEY
HANDS FREE GENERIC

"Setting" menu

This menu is used to enable/disable and set some motorcycle functions.
To access the "setting menu" press and hold button (2) "t" for 3 seconds.
Note
When within this menu no other function can be displayed.
Important
For safety reasons, the setting menu can only be accessed when motorcycle speed is lower than or equal to 20 Km/h. If
this menu is open and the speed of the motorcycle exceeds 20 km/h, the dashboard automatically exits the menu and
returns to the "main" display.
The setting menu contains the following "items":
Motor relay or Throttle Motor not functioning
Dashboard on tank not functioning
Atmospheric pressure sensor
Engine Temperature Sensor
Air Temperature Sensor
Injection relay
Coil
Injector
Timing/rpm sensor
Lambda sensor
Fan relay
CAN communication line
Battery voltage (HIGH or LOW)
ABS control unit not functioning
Rear stop light
ECU error
HF communication problem
Hands Free ECU error