NEC Univerge SV8100 Features And Specifications Manual page 765

UNIVERGE SV8100
UNIVERGE SV8100 supports Early Media.

UNIVERGE SV8100 SIP restricts an outgoing call under the following conditions:

SIP configuration failed

SIP registration failed

CD-CP00-US and MG16 Link down

PZ-( )IPLA
Lack of

PZ-( )IPLA
Lack of a

Both port numbers can be configured by system data.

ToS Support.

Conditions
SIP Stations which support RFC 3842 (Message Waiting) receive Message Waiting Lamp

indications.
SIP Station – PZ-32IPLA, PZ-64IPLA or PZ-128IPLA does not support NAT traversal.

SIP Station – PZ-32IPLA, PZ-64IPLA or PZ-128IPLA does not support a Blind Transfer

feature.
With Version 4000 (4.01 or higher) software, video codecs H.264, H.263, and H.261 are

supported.
Video is supported when P2P for standard SIP is turned on. (Program 10-26-03 SIP

Peer-to-Peer Mode ON)
Auto start video when call is answered is not supported.

Standard SIP video Codecs are not supported across CCIS

Standard SIP video Codecs are not supported across NetLink.

Standard SIP terminal can not negotiate video Codec with SP310.

SIP Station and SIP Trunk require a license key for activation. Once activated, the SIP

Client license may be shared between SIP Station and SIP Trunks.
SIP protocol (RFC3261) is used.

SIP Station uses the PZ-( )IPLA as a media gateway.

Default UDP listen port for a SIP station is 5070. Both port numbers can be configured by

system data.
UNIVERGE SV8100 Station registration policy supports an authentication feature. Enabling

this policy prevents the registered telephone from unexpected override.
IP Single Line Telephone (SIP)
resource
bandwidth
Issue 7.0
2 - 737