Lan Connection - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Program
Program Name
Number
35-03-01 SMDR Port Assignment for
Trunk Group
35-04-01 SMDR Port Assignment for
Department Groups

LAN Connection:

Program
Program Name
Number
10-12-01 CD-CP00-US Network Setup – IP
Address
10-20-01 LAN Setup for External
Equipment – TC Port
10-20-03 LAN Setup for External
Equipment – Keep Alive Time
SV8100 Communications Analyst Enterprise
Description/Comments
Assign the SMDR port for each
trunk group. This is the SMDR port
to which the incoming call
information should be sent.
Assign the SMDR port for each
department group. This is the
SMDR port where the outgoing
call information should be sent.
Description/Comments
When using an IP connection, set
up the IP address used to connect
from the CallAnalyst PC to the
system.
When using an IP connection,
define the TCP port used for
communicating to the CallAnalyst
(External Device 5 = SMDR,
Entries: 0~65535). This entry must
match the entry made in the CDM
setup with the CallAnalyst
program.
Define the TCP port/address/etc.
Assigned Data
1
Trunk Group: 1~100,
SMDR Port: 1~8

(default = 1)
Department Group:
01~64
SMDR Port: 1~8
(default = 1)
Assigned Data
1
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.254.255.254

192.0.0.1 ~
223.255.255.254
(default =
192.168.0.10)
0~65535
default:
External Device 1 (CTI
Server) = 0
External Device 2
(ACD MIS) = 4000
External Device 5
(SMDR Output) = 0
External Device 6 (DIM

Output) = 0
External Device 11
(O&M Server) = 8010
External Device 12
(Traffic Report Output)
= 0
External Device 13
(Room Data Output for
Hotel Service ) = 0
1~255 (seconds)
(default = 30 seconds)
Issue 5.0
Level
2 3

Level
2 3

2 - 1231