Ip Multiline Station (Sip) - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Enhancements
The same user name and password can be assigned to IP Multiline Station, MH240 and Desktop
ports when automatic or manual registration is used (Version 3000 or higher software).
With Version 3000 or higher system software, the Registration Override feature is enhanced to allow
IP Multiline Stations (SIP) using 1st Party CTI application or Multiline Stations (SIP) in a system using
3rd Party CTI applications (Desktop Shared Services or UCB) to be overridden giving users access to
their IP telephone from any location. By utilizing the override login function, users have the flexibility of
logging into their IP Station in the office as well as remotely at the home office.
NAPT (Network Address Port Translation) - With Version 3000 or higher system software, DT700
series terminals can be installed at remote locations, however Plug and Play is not supported. Some
configuration in the remote router is required, and terminal firmware must be upgraded to
Version 3.0.0.0.
When upgrading to Version 3100 or higher software, four IP Terminal Basic licenses are provided. If
a system with Version 3000 (3.01 or lower) is upgraded to Version 3100 software, the system gains
four IP Terminal licenses as soon as it is upgraded.
Description
The UNIVERGE SV8100 system supports IP extensions using a variety of multiline terminals. These
telephones have the same look and functionality of typical multiline telephones, but they are connected
to the CCPU via IP rather than by a hardwired connection to a DLC port.
The following DT700 IP multiline telephones (ITL) support IP extensions:
ITL-2E-1 (BK) TEL

ITL-6DE-1 (BK) TEL

ITL-8LD-1 (BK) TEL/ITL-8LD-1 (WH) TEL

ITL-12D-1 (BK) TEL/ITL-12D-1 (WH) TEL

ITL-12PA-1 (BK) TEL

ITL-24D-1 (BK) TEL/ITL-24D-1 (WH) TEL

ITL-32D-1 (BK) TEL/ITL-32D-1 (WH) TEL

ITL-320C-1 (BK) TEL


IP Multiline Station (SIP)

IP Multiline Station (SIP)
Issue 7.0
2 - 717