NEC Univerge SV8100 Features And Specifications Manual page 759

UNIVERGE SV8100
Program
Program Name
Number
10-20-01 LAN Setup for External
Equipment – TCP Port
10-46-06 DT700 Server Information Setup
– Register Mode
10-46-13 DT700 Server Information Setup
– Subscribe Session Port
10-46-14 DT700 Server Information Setup
– NAT Mode
10-58-01 Network Address – Network
Address
IP Multiline Station (SIP)
Description/Comments
Define the TCP port (0~65535)
when communicating to the SMDR
(type 5).
Assign the port number in which
the SIP messages are sent on the
IPLA. This same port number
must be assigned in the SIP
multiline terminals. If this
command is changed, it requires a
CPU reset.
Assign the port number to be used
for subscription messages
between the SV8100 and the
DT700 terminals.
Turns On/Off the NAT mode of the
system.
This program sets the local area
network of the DT700 terminal
when the system has a NAT router
and a local router.
Assigned Data
1
0~65535
default:
External Device 1 (CTI
Server) = 0
External Device 2
(ACD MIS) = 4000
External Device 5
(SMDR Output) = 0
External Device 6 (DIM
Output) = 0

External Device 11
(O&M Server) = 8010
External Device 12
(Traffic Report Output)
= 0
External Device 13
(Room Data Output for
Hotel Service) = 0
External Device 14
(IP-DECT Directory
Access) = 0
0~65535
(default = 5080)
0~65535
(default = 5081)
0 = Off

1 = On
(default = 0)
0.0.0.0~
126.255.255.254
128.0.0.1~
191.254.255.254
192.0.0.1~
223.255.255.254
(default = 0.0.0.0)
Issue 7.0
Level
2 3



2 - 731