Lan Connection - NEC Univerge SV8100 Features And Specifications Manual

Issue 8.01

LAN Connection:

Program
Program Name
Number
10-12-09 CD-CP00-US Network Setup – IP
Address
10-20-01 LAN Setup for External
Equipment – TC Port
10-20-03 LAN Setup for External
Equipment – Keep Alive Time
For additional SMDR programming options, see
Programming Notes:
If the system is programmed to display the date (Program 35-02-14=1), the date is displayed

regardless of the setting for display of trunk name (Program 35-02-03) and only the trunk number is
printed.
For example, if trunk port 049 has a trunk name of PRI Ch1, if Program 35-02-03 = 0 (name) and

Program 35-02-14 = 1 (display date), then SMDR shows 8/19 049. However, if Program 35-02-14
= 0 (date not displayed), the SMDR shows PRI Ch1.
2 - 1240
Description/Comments
When using an IP connection, set
up the IPLA/IPLB IP address used
to connect from the CommAnalyst
PC to the system.
When using an IP connection,
define the TCP port used for
communicating to the
CommAnalyst (External Device 5
= SMDR, Entries: 0~65535). This
entry must match the entry made
in the CDM setup with the
CommAnalyst program.
Define the TCP port/address/etc.
Station Message Detail Recording on page
UNIVERGE SV8100
Assigned Data
0.0.0.0~
126.255.255.254
128.0.0.1~
191.254.255.254
192.0.0.1~
223.255.255.254
(default =
192.168.0.10)
0~65535
default:
External Device 1 (CTI
Server) = 0
External Device 2
(ACD MIS) = 4000
External Device 5
(SMDR Output) = 0
External Device 6 (DIM
Output) = 0
External Device 11
(O&M Server) = 8010
External Device 12
(Traffic Report Output)
= 0
External Device 13
(Room Data Output for
Hotel Service ) = 0
1~255 (seconds)
(default = 30 seconds)
SMB8000 Communications Analyst
Level
1 2 3



2-1299.