NEC Univerge SV8100 Features And Specifications Manual page 741

UNIVERGE SV8100
Program
Program Name
Number
20-08-10 Class of Service Options
(Outgoing Call Service) – Signal/
Voice Call
20-09-05 Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
80-01-01 Service Tone Setup – Tone 28
(28) (Speaker Monitor Tone)
80-01-02 Service Tone Setup – Basic Tone
Number
82-01-01 Incoming Ring Tone –
Frequency 1
Intercom
Description/Comments
Turn Off or On an extension ability
to force Handsfree Answerback or
Forced Intercom Ringing for
outgoing Intercom calls.
Turn Off or On an extension user
ability to enable Handsfree
Answerback or Forced Intercom
Ringing for their incoming
Intercom calls.
Allow a busy extension to
Manually (0) or Automatically (1)
receive off-hook Signals.
This tone changes the tone the
originator of an ICM call hears.
(The tone cannot be changed for
what is heard by the user when
receiving an ICM call.)
Define up to 64 Service Tones.
Each service tone is defined by
the combination of 32 Basic
Tones.
Customize the Intercom ring tone.
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 1 for
COS 1~15)
Refer to Table 2-27
Service Tone Setup
Defaults, Program
80-01-01 on page
2-655 (Service Tone
#28).
1~33
(0 = No Tone)
(33=Default Time Slot)
Refer to Table 2-28
Service Tone Setup,
Program 80-01-02 on
page 2-659.
1 = 520Hz
2 = 540Hz
3 = 660Hz
4 = 760Hz
5 = 1100Hz
6 = 1400Hz
7 = 2000Hz
Default:
Refer to Table 2-31
Default Incoming
Ringing Tone.
Issue 7.0
Level
2 3




2 - 713