Description; Intended Use; Openssl; Transferring Openoss License Terms To A Pc - Siemens SINAMICS G120C Operating Instructions Manual

Description

3.1

Intended use

Use for the intended purpose
The converter described in this manual is a device to control a three-phase motor. The converter
is designed for installation in electrical installations or machines.
It has been approved for industrial and commercial use on industrial networks. Additional
measures have to be taken when connected to public grids.
The technical specifications and information about connection conditions are indicated on
the rating plate and in the operating instructions.
Use of third-party products
This document contains recommendations relating to third-party products. Siemens accepts the
fundamental suitability of these third-party products.
You can use equivalent products from other manufacturers.
Siemens does not accept any warranty for the properties of third-party products.
3.2

OpenSSL

Use of OpenSSL
This product contains software developed in the OpenSSL project for use within the OpenSSL
toolkit.
This product contains cryptographic software created by Eric Young.
This product contains software developed by Eric Young.
Further information is provided on the Internet:
3.3

Transferring OpenOSS license terms to a PC

Requirement
You have an empty memory card and a reader for the memory card.
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
OpenSSL (https://www.openssl.org/)
Cryptsoft (mailto:eay@cryptsoft.com)
3
27