Creating A Project; Transfer Inverters Connected Via Usb Into The Project - Siemens SINAMICS G120C Operating Instructions Manual
Low voltage inverter
Hide thumbs
Also See for SINAMICS G120C:
- Operating instructions manual (478 pages) ,
- Compact operating instructions (92 pages) ,
- Getting started (68 pages)
Table of Contents
Advertisement
Commissioning
5.4 Commissioning with a PC
5.4.1
Creating a project
Creating a project
Procedure
In order to create a new project, proceed as follows:
1. In the menu, select "Project" → "New...".
2. Specify a name of your choice for the project.
You have created a new project.
5.4.2
Transfer inverters connected via USB into the project
Transferring inverters connected via USB to the project
Procedure
Proceed as follows to transfer an inverter connected via USB to your project:
1. Switch on the inverter supply voltage.
2. First insert a USB cable into your PC and then into the inverter.
3. The PC operating system installs the USB driver when you are connecting the inverter
and PC together for the first time.
– Windows 7 installs the driver automatically.
– For Windows XP you must acknowledge several system messages.
4. Start the commissioning software.
5. Select the "Accessible nodes".
Figure 5-3
108
"Accessible nodes" in STARTER
Operating Instructions, 07/2015, FW V4.7 SP3, A5E34263257B AC
SINAMICS G120C converter
Advertisement
Table of Contents
