Documentation For Acceptance; Creating Logs With The Settings Of The Safety Functions - Siemens SINAMICS G120 Function Manual

A.2

Documentation for acceptance

A.2.1

Creating logs with the settings of the safety functions

STARTER creates a log of the settings of the safety functions, which you can use for your
machine documentation.
Procedure
Proceed as follows to create the acceptance documentation for the drive using STARTER:
1. In STARTER, select "Create acceptance documentation":
2. Select the suitable template and create a report for each drive of your machine or system:
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 04/2014, FW V4.7, A5E34261271B AA
STARTER has templates in German and English.
– Template for the machine documentation:
de_G120x_Dokumentation_Maschine: German template.
en_G120x_Documentation_machine: English template.
– Report of the settings for the basic functions, from firmware version V4.4 onwards:
de_G120x_Basicc_V4.4...: German report.
en_G120x_Basic_V4.4...: English report.
– Report of the settings for the extended functions, from firmware version V4.4 onwards:
Protokoll_de_G120x_Extended_V4.4...: German report.
Protocol_en_G120x_Extended_V4.4...: English report.
A.2 Documentation for acceptance
Appendix
309