Guide Through This Manual - Siemens SINAMICS G120 Operating Instructions Manual

Introduction

2.2 Guide through this manual

2.2 Guide through this manual
In this manual, you will find background information on your inverter, as well as a full
description of the commissioning procedure:
14
① Should you be unfamiliar with assigning
parameters to the inverter, background
information can be found here:
• Adapting inverter to application (Page 15)
• Frequently required parameters (Page 16)
• Extended scope for adaptation (Page 18)
② Information on the inverter hardware can be
found here:
• SINAMICS G120C inverter (Page 21)
All information relating to the commissioning of
your inverter is located in the following
chapters:
③
• Installing (Page 25)
④
• Commissioning (Page 47)
• Adapting the terminal strip (Page 79)
• Configuring the fieldbus (Page 91)
⑤
• Data backup and series commissioning
(Page 71)
⑥
Information regarding the maintenance and
diagnostics of your inverter is located in the
following chapters:
• Servicing and maintaining (Page 247)
• Alarms, faults and system messages
(Page 255)
⑦
The most important technical data for your
inverter is located in this chapter:
• Technical data (Page 273)
Operating Instructions, 01/2011, FW 4.4, A5E02999804A AB
SINAMICS G120C Inverter