Guide Through This Manual; Overview Of Documentation - Siemens SINAMICS G120 Function Manual

Introduction

1.2 Guide through this manual

1.2 Guide through this manual
Chapter
Description (Page 15)
Activation (Page 43)
Commissioning (Page 69)
Alarms, faults and system
messages (Page 133)
System properties (Page 151)
Appendix (Page 153)
1.3

Overview of documentation

Manuals and software are available for every inverter application:
Table 1- 1 Documentation for SINAMICS G120
Planning and configuring
SIZER
engineering tool
Configuration Manual
Selecting geared motors,
motors and inverters
using calculation
examples
Hardware Installation Manual, Power Modules
Comprehensive information on every Power
Module. Available for:
● PM230
● PM240
● PM250
● PM260
10
Installation and
connection
---
---
Why do you need this information?
This chapter contains detailed information on the safety functions
of the inverter.
If you use the fail-safe inputs of the inverter, this chapter contains
a series of wiring examples to help you. Refer to the relevant
example for the wiring you require for your particular application.
Read the description in this chapter if you want to configure
PROFIsafe communication.
This chapter describes the different commissioning methods and
helps you choose the most appropriate method for your
application.
This chapter contains information on the diagnostics and
troubleshooting procedures for the safety functions.
This chapter provides an overview of all the key properties and
data of the safety functions.
The appendix contains an overview of the standards and
regulations that you, the machine manufacturer or operator, must
observe when using the safety functions.
Commissioning
---
---
---
Safety Integrated Function Manual, SINAMICS G120
Function Manual, 07/2010, FW 4.3.2, A5E03052391B AA
Service and maintenance
---
---
Hardware Installation Manual,
Power Modules
(refer to the lefthand column)