End Cable Removal Note; Disc Plate Removal Note - Mazda CX-7 2007 Workshop Manual

End Cable Removal Note

1. Remove the end cable installation bolts.
2. Disconnect the end cable from the operation lever.
3. Bend the end cable tab (rear parking brake cable
side) in the direction shown in the figure.
4. Move the rear parking brake cable end in the
direction shown in the figure and disconnect it
from the end cable.
5. Remove the end cable.
Brake Caliper Component Removal Note
1. Remove the brake caliper assembly from the trailing link and suspend it with a cable so it does not interfere.

Disc Plate Removal Note

1. If any disc plate is difficult to remove, perform the following steps to remove it.
(1) Insert a flathead screwdriver into the service
hole and turn the adjuster in the direction of
the arrow to compress the parking brake
shoe.
(2) Remove the disc plate.
04-12–10
PARKING BRAKE SYSTEM
REAR PARKING BRAKE CABLE
END CABLE
2
TAB
1
LEFT SIDE
acxuuw00001902
RIGHT SIDE
acxuuw00001050