Abs Wheel-Speed Sensor Removal Note; Caliper Component Removal Note; Bolt (Rear Shock Absorber Lower Side) Removal Note; Bolts (Rear Lateral Link Outer Side And Rear Upper Arm Outer Side) Removal Note - Mazda CX-7 2007 Workshop Manual

2007 mazda cx-7

Hide thumbs Also See for CX-7 2007:

Table of Contents

ABS Wheel-speed Sensor Removal Note

1. Remove the rear ABS wheel-speed sensor and

rear ABS wheel-speed sensor harness connected

to the rear trailing link.

1. Suspend the caliper aside with cable.

1. Support the trailing link with a jack.

2. Remove the bolts (rear shock absorber lower

1. Raise the trailing link to the unloaded condition

with a jack.

• Jacking up the rear suspension to the no-

occupant position will lighten the force on the

bushing and make it easier to perform the

2. Remove the bolts (rear lateral link outer side and

rear upper arm outer side).

1. Raise the rear trailing link to the unloaded

condition with a jack.

• Jacking up the rear suspension to the no-

occupant position will lighten the force on the

bushing and make it easier to perform the

2. Tighten the bolts (rear lateral link outer side and

rear upper arm outer side).

REAR SUSPENSION

acxuuw00001786

acxuuw00001787

Show Quick Links

Table of Contents