Parking Brake Shoe Removal Note; Operation Lever, Pin, Adjuster Bolt And Nut, Tappet Installation Note; Parking Brake Shoe Installation Note - Mazda CX-7 2007 Workshop Manual

2007 mazda cx-7
Hide thumbs Also See for CX-7 2007:
Table of Contents

Advertisement

Parking Brake Shoe Removal Note

1. Pull the parking brake shoe downward and
disengage it from the shoe stopper.
2. Press the adjuster bolt and tappet by hand, and
slowly remove the parking brake shoe.
Note
• When removing the parking brake shoe,
firmly press the adjuster bolt and tappet by
hand and slowly remove the parking brake
shoe to prevent the adjuster bolt, tappet,
operation lever and other parts from flying
off.

Operation lever, Pin, Adjuster Bolt and Nut, Tappet Installation Note

1. Install the operation lever, pin, adjuster bolt and
nut, and tappet so that the adjuster nut is facing
toward the vehicle front.
2. Completely tighten the adjuster bolt and nut.
3. Move the operation lever by hand and verify that it
operates properly.
• If proper operation cannot be verified,
reinstall.

Parking Brake Shoe Installation Note

1. Measure the parking brake lining thickness with a
vernier caliper or measuring scale.
• If it is less than the minimum thickness, install
a new parking brake shoe.
Minimum parking brake shoe thickness
1.0 mm {0.04 in}
2. After installing the opening of the parking brake
shoe to the adjuster bolt and tappet, push the
brake shoe upward and attach it to the shoe
stopper.
PARKING BRAKE SYSTEM
SHOE STOPPER
ADJUSTER BOLT
FRONT
ADJUSTER NUT
SHOE STOPPER
BACKING
PLATE
PARKING BRAKE SHOE
OPERATION LEVER
PARKING BRAKE SHOE
SHOE STOPPER
PARKING BRAKE SHOE
acxuuw00001051
04-12
TAPPET
PIN
acxuuw00001052
acxuuw00001053
acxuuw00001054
04-12–11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents