Mazda CX-7 2007 Workshop Manual page 773

Output Shaft Disassembly Note
1. Remove the coupling unit from the SST.
2. Install the coupling unit to the press as shown,
and remove the output shaft together with the
coupling unit.
3. Install the companion flange to the output shaft.
4. Secure the companion flange using the SST, and
remove the bolts.
5. Remove the output shaft.
Bearing Disassembly Note
1. Remove the bearing using the SSTs and a press.
Substitution SST
• 49 S033 108
Outer diameter: 33— 55 mm {1.30— 2.16 in}
Height: 155 mm {6.10 in} or more
End Of Sie
ALL WHEEL DRIVE (AWD)
acxuuw00001448
49 S120 710
acxuuw00001449
49 M005 797
49 S033 108
acxuuw00001450
03-19–7
03-19