Mazda CX-7 2007 Workshop Manual page 759

PROPELLER SHAFT INSPECTION
1. Measure the propeller shaft center runout using
the dial gauge.
• If it exceeds the maximum specification,
replace the propeller shaft as a single
component.
Maximum propeller shaft runout
0.8 mm {0.031 in}
2. Inspect the play and rotation of the joint by turning
the universal joint in the directions shown by the
arrows.
• If it is not within the specification, replace the
propeller shaft.
Propeller shaft starting torque
0.29— 1.47 N·m {3.0— 14.9 kgf·cm, 2.6—
13.0 in·lbf}
End Of Sie
PROPELLER SHAFT
id031500800500
03-15
acxuuw00000573
ampjjw00002749
03-15–5